Burkert Type 8056 - Manual (Page 23)

SE56
23
10.1* Calibration of the converter
10.2* Autotest converter
10.3* Flow rate simulation enabling
10.4 Firmware revision/version
11.1 Level 2 access code enter (user choice and setting of access code if required)
11.2 Load factory data pre-set
11.3 Load user data saved
11.4 Save user data
11.7 KS coefficient (only for service purposes)
11.5 Ignore the calibration error during the switch on test (enable/disable)
11.6 KR coefficient (only for service purposes)