Burkert Type 8186 - Manual (Page 18)

PIN
Disable permanently?
Only the following functions are permitted with activated PIN:
l Select menu items and show data
l Read data from the sensor into the indicating/adjustment module.
In this menu item the most important sensor information can be
displayed:
l Instrument type
l Serial number: 8-digit number, e.g. 12345678
Instrument type
Serial number
12345678
l Date of manufacture: Date of the factory calibration
l Software version: Edition of the sensor software
Calibration date
Software version
l Date of last change using PC: Date of the last change of sensor
parameters via PC
Last change using PC
l Sensor details, e.g. approval, process fitting, seal, measuring cell,
measuring range, electronics, housing, cable entry, plug, cable
length etc.
Sensor characteristics
Display now?
5 .2 Adjustment menu 4 … 20 mA/HART
In the menu item "Display" you can define how the measured value
should be presented on the display.
Info/Info
Display/Display
18 Indicating and adjustment module
5 Setup - Sensors up to software 3.99
41787
-EN
-120316