Clear-Com Eclipse-Omega - Manual (Page 49)

Clear-Com Communication Systems
Eclipse Matrix Installation Instruction Manual 4 - 1 9
Figure 4-12: RLY-6/GPI-6 Daisy Chain Connection
Figure 4-13 shows the pin assignments of RJ-45 connectors when
used to connect to interfaces (IMF-3 frames).
Figure 4-13: Matrix Frame to IMF-3 Interface Connection
Note: If the GPI/RLY port is used a ferrite must be added to the
socket end of the cable. A suitable ferrite is Würth
Electronik part: 74271132.
Note: Shielded cable should be used.
Ports
Rear View of IMF-3 Frame
GPI/RLY
Interface
Connector
RJ-45 RJ-45 RJ-45 RJ-45 RJ-45
DB-9 DB-9 DB-9 DB-9 DB-9
RJ-45 RJ-45 RJ-45 RJ-45 RJ-45
DB-9 DB-9 DB-9 DB-9 DB-9
Other
Interfaces
RLY-6
#2
GPI-6
#2
GPI-6
#1
RLY-6
#1
1
2
3
4
5
6
7
8
Matrix Frame End
Call Receive +
Call Receive -
Audio Receive +
Audio Send +
Audio Send -
Audio Receive -
Call Send +
Call Send -
Call Send +
Call Send -
Audio Send +
Audio Receive +
Audio Receive -
Audio Send -
Call Receive +
Call Receive -
Interface End
Pair 2
Pair 1
Pair 3
Pair 4
Interface Wiring
1
2
3
4
5
6
7
8