Clear-Com Eclipse-Omega - Manual (Page 58)

Clear-Com Communication Systems
Eclipse Matrix Installation Instruction Manual
4 - 2 8
Figure 4-20: RLY-6 Interface DB-9M Connector Pinout
IMF-102 Interface Module Frame Wiring
The wiring of an RLY-6 interface that is placed in an IMF-102 interface
frame is the same as the wiring for a RLY-6 interface placed in an
IMF-3 interface frame. The only difference is that an IMF-102 interface
frame houses only two interfaces, and they are mounted horizontally
rather than vertically in the frame. Figure 2-1 and Figure 2-2 in
Chapter 2 illustrate the differences between these interface frames.
Refer to the respective manuals for these interfaces and frames in the
Eclipse manual set for more information.
Configuration
To associate a relay to a label, use the Eclipse Configuration System,
as described in its manual.
1
2
9
8
7
6
5
4
3
#1/4 Normally Open
#2/5 COM
#3/6 Normally Open
#1/4 Normally Closed
#1/4 COM
#2/5 Normally Closed
#2/5 Normally Open
#3/6 Normally Closed
#3/6 COM