Clear-Com Eclipse-Omega - Manual (Page 65)

Clear-Com Communication Systems
Eclipse Matrix Installation Instruction Manual 4 - 3 5
WIRING A BINAURAL HEADSET (ICS-2003)
The ICS-2003 has a second earphone output, but it functions and is
wired differently from all other ICS panels. This output is not available
on the “miscellaneous” connector, but on the main board of the panel
on a separate header connector. If a six pin headset connector were
installed on the front or rear of the panel, this output would be
available.
The default configuration of the panel has both earphone outputs being
fed with both intercom and program audio. To separate the “program”
input to the second ear only, use the Eclipse Configuration System.
Refer to the Eclipse Configuration System Instruction Manual (part
810299Z) for more information.
Figure 4-24 shows the wiring of a six pin XLR connector for a binaural
headset.
Figure 4-24: Binaural Headset Wiring
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
X
X
X
X
X
X
113
115
120
Front Panel Headset Connector
1
2
3
4
5
6
7