Clear-Com CellCom Battery Pack Charger - Manual (Page 155)

Clear-Com Communication Systems
CellCom V2.0.3 Instruction Manual
1 0 - 3
• Click the ‘Retrieve’ button in the "Serial Comms" section of the
dialog. Retrieval of the configuration should take around 1 min. 15
secs. If the program fails to connect to the Cellcom basestation,
the following dialog will be displayed:
Figure 10-3: Configuration Editor Serial Timeout
• If this occurs, check the cable, PC and basestation connection,
and also make sure that 30 seconds have elapsed since powering
on the basestation to ensure that serial comms have been
activated.
• Once the configuration has been retrieved from the basestation,
the display should appear similar to the following screen shot:
Figure 10-4: Configuration Setup