Clear-Com CellCom Battery Pack Charger - Manual (Page 94)

Clear-Com Communication Systems
CellCom V2.0.3 Instruction Manual
5 - 2 4
The VOX delay can be set to values between 50ms and 5000ms in
50ms steps. Turn the Setup knob clockwise to increase the delay
and anticlockwise to reduce the delay.
To configure the levels for a party-line port
The Levels menu allows Input, Output and nulling levels to be set for a
party line.
1. Select the party line port and then select ‘LEVELS’ from the party
line menu to display the levels menu.
Figure 5-54: Level Editing Menu for Party Line
2. Select the ‘INPUT’ item to display the input level setup menu.
Figure 5-55: Party Line Input Level
3. Rotate the setup/enter knob clockwise or counterclockwise to
increase or decrease the level in 1 dB increments between -20dB
and +6dB.
4. When the desired audio level appears on the screen, press and
release the setup/enter knob to select it,
5. The changes are saved and applied automatically five seconds after
the last time the setup/enter knob was pressed or turned. The
front-panel display flashes to indicate that the changes are being
saved and applied.
6. Select the ‘OUTPUT’ item to display the output level setup menu.
Figure 5-56: Party Line Output Level
7. Rotate the setup/enter knob clockwise or counterclockwise to
increase or decrease the level in 1 dB increments between -20dB
and +6dB.
8. When the desired audio level appears on the screen, press and
release the setup/enter knob to select it.
9. The changes are saved and applied automatically five seconds after
the last time the setup/enter knob was pressed or turned. The
Editing levels for PLCHA - PLCHA (in dB)
OUTPUT
0 LoNULL
116
BACK
INPUT
0 HiNULL
27
Input level for PLCHA - PLCHA (dB)
0
Output level for PLCHA - PLCHA (dB)
0