Clear-Com CellCom Battery Pack Charger - Manual (Page 93)

Clear-Com Communication Systems
CellCom V2.0.3 Instruction Manual
5 - 2 3
1. Select PORTS from the main menu, then select PLCHA or PLCHB
from the AVAILABLE AUDIO port menu which appears.
2. The port configuration menu is displayed. Scroll rightwards to
display the second page of the menu.
3. Select GATE. The noisegate menu is displayed.
Figure 5-50: Party Line Noisegate Menu
4. Scroll to the ‘STATE’ option and press the setup/enter knob to
display the noisegate state menu.
Figure 5-51: Party Line Noisegate Options Menu
Scroll through the options to enable or disable the noisegate and
use the enter function to select the required state. The main
noisegate menu will be redisplayed.
5. Select the level entry to display the party line level setup menu.
Figure 5-52: Party Line Noisegate Trigger Level
The vertical bar indicates the noisegate trigger level. Turning the
setup knob clockwise increases the noisegate level (towards the
maximum -10dB) and turning it anticlockswise reduces the
noisegate level (towards -70dB). The horizontal bar indicates the
current input audio level in real-time to assist in setting the
noisegate level.
6. Select the ‘DELAY’ option on the noisegate menu to set the VOX off
delay level. This allows the operator to set a delay in ms before
audio is cut by the noisegate.
Figure 5-53: VOX Delay Setup
SELECT PLCHA NOISEGATE PARAM
LEVEL
-70 DELAY
100
BACK
STATE
OFF
Trigger PLCHA calls from VOX? (Curr. NO)
YES BACK NO
SET PLCHA NOISEGATE LEVEL
-65dB TRIG -70dB
Select VOX off delay in (ms) for PLCHA
100