Clear-Com CellCom Battery Pack Charger - Manual (Page 195)

Clear-Com Communication Systems
CellCom V2.0.3 Instruction Manual
1 2 - 1
SPECIFICATIONS
CellCom Basestation
Basestation-to-Beltpack
Frequency Response 100 Hz – 7.1 kHz
Number of CEL-BP Beltpacks
per Basestation
20
Number of CEL-TA Transceiver/
Antennas Supported by Basestation: 10
Number of Transceiver/
Antenna Ports 2
Programming Port DB-9F
Relay Port DB-9M; normally open and normally
closed wiring
Party-Line Intercom A and
Intercom B (each)
XLR-3F with XLR-3M loop through,
on/off termination switch
(via software), Clear-Com RTS selection
(via software)
4-Wire/Matrix Connection 4 RJ-45 for 4-wire (Intercom 3 – 6)
Program Input XLR-3F, transformer isolated, line-level
input
Stage Announce Output XLR-3M, transformer isolated, line-level
output
Front-Panel Headset XLR-4M connector with 2-channel,
mono-summed capability and individual
talks and listens
Front Panel Display 254 x 32 dot-graphic VFD
Front Panel Indicators 2 Talk LED’s for front-panel headset;
CH A and B party-line enable LED’s;
Program Input enable LED; 10 individual
beltpack LEDs
Basestation Programming/Editing Push-to-enter rotary encoder
12