CognitiveTPG B780 User Manual
Page 32
Chapter 3: Migrating to a new printer
20
A776 (B780) Programming Guide
A776-PG00001 C 12/09
Select B780 Map Logo Option for B780
Code (Hexadecimal)
1F 03 25 10 n
This command selects the B780 map logo option. This is available for A721 applications that rely on printing logos on
the receipt. If this command is enabled, then the logos will be modifed by the printer firmware such that they print in
an acceptable manner on the thermal receipt station. The best print quality will be obtained by incorporating logos
which meet the thermal receipt station requirements.
n
Map logo option
00
Disabled (default)
01
Enabled
Select Cover Open Option for B780
Code (Hexadecimal)
1F 03 25 11 n
· When the cassette cover open option is enabled, and the operator opens the cassette cover, the printer will
stop printing and enter an error state.
· When the option is disabled, the printer will ignore the state of the cassette cover.
n
Cassette Cover Option
00
Disabled
01
Enabled (default)
Select Concurrent Print to Receipt for B780
Code (Hexadecimal)
1F 03 25 12 n
When enabled, A721 concurrent print is emulated. When concurrent print is set via command 1B 63 30 n, whatever is
printed on the cut sheet will be printed on the receipt after the cut sheet is ejected.
n
Concurrent print
00
Disabled
01
Enabled
Select B780 with A776 Slip Functions
Code (Hexadecimal)
1F 03 25 13 n
When enabled, B780 operates like A776 on the slip station. Provided for applications which control both A776 and
B780.
n
A776 Slip functions
00
disabled (default)
01
enabled
Select B780 Concurrent Print to Electronic Journal
Code (Hexadecimal)
1F 03 25 14 n
When enabled, A721 concurrent print is emulated. Whatever is printed on the cut sheet is saved in the electronic
journal buffer.
n
Concurrent print to electronic journal
00
disabled
01
enabled