Meriam M2 – Series Smart Manometer - Manual (Page 18)

12
Auto Shut-Off
Enabling the Auto Shut-Off feature allows the manometer
to turn itself off after a user selected period of keypad
inactivity. Selectable options include DISABLED, 10
Minutes (which is the factory shipped default), 20 Minutes,
30 Minutes, 45 Minutes and 60 Minutes. Disabling this
feature requires the manometer to being turned off
manually using the On/Off key.
To configure auto shut-off follow these steps:
Keystroke Display
1. Follow steps 1-6 in
the User Info Select
table.
Top line reads “AUTO SHUT-
OFF” and bottom line reads
“ENTER TO SELECT”.
2. Press the PRGM
key, then the up or
down arrow keys, until
the desired shut-off
time is shown.
Top line reads “AUTO SHUT-
OFF” and bottom line toggles
to “DISABLED”, “10”, “20”,
“30”, “45” and “60” minutes .
3. Press the PRGM
key. Desired Auto Shut-Off time is
selected, top line reads
“AUTO SHUT-OFF” and
bottom line reads “ENTER
TO SELECT”.
4. Press the left arrow
key twice. Returns to Measure Mode.
The “Auto Shut-Off” timer is suspended during Data
Logging and Leak Test sessions to prevent accidental loss
of information. Auto Shut-Off is automatically re-instated
after completion of Data-Logging or Leak Test sessions.