Safety information, Safety warnings – Meriam M2 – Series Smart Manometer User Manual
Page 2
2
Safety Information
Failure to follow all instructions could result in injury. Read,
understand and follow all safety warnings and instructions
provided with this product. Also, meet or exceed your
employer’s safety practices.
In no event shall Meriam be liable for any indirect, special, incidental,
consequential or punitive damages or for any lost profits arising out
of or relating to any services provided by Meriam or its affiliates. It is
not possible for Meriam to identify all foreseeable uses/misuses,
therefore all persons involved in commissioning, using or maintaining
this product must satisfy themselves that each intended application
is acceptable.
Safety Warnings
The table below defines the safety symbols, signal words and
corresponding safety messages used in the manual to identify
potential hazards and are intended to warn persons about hazards
that could result in personal injury or equipment damage.
This is the Read Instruction Manual symbol. This symbol indicates
h that you must read the instruction manual.
This is the Safety Alert symbol. This symbol indicates a WARNING.
Warnings alert you to actions that can cause personal injury or pose
a physical threat. Please read these carefully.
This is the Safety Glasses symbol. This symbol indicates that you
must wear approved safety glasses during the task.
This is the Safety Gloves symbol. This symbol indicates that you
must wear approved safety gloves during the task.
Indicates a potentially hazardous situation which, if
not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if
not avoided, could result in minor or moderate injury.
Indicates information essential for proper product
installation, operation or maintenance.
Information in this document is subject to change without notice. Check
the Meriam web site
the latest manual revision.