Meriam M2 – Series Smart Manometer - Manual (Page 9)

3
For General Purpose M2 Series

Substitution of components may impair operation and
safety.

Disconnect power before servicing.

The product should not be powered with a
combination of new and old batteries.

The product should not be powered with a
combination of batteries from different manufacturers.
For All Models
Do not exceed the Pressure Limits listed in the
Specifications section of this manual. Failure to operate
within the specified pressure limit could result in minor or
moderate injury.
For All Models
User must use a wrench on the pressure manifold when
installing
user’s 1/8” NPT fitting. Do not tighten the fitting
without using a wrench on the pressure manifold. Failure to
use a wrench on the manifold will damage the plastic
enclosure and void warranty No torque should be applied to
the manifold with respect to plastic enclosure.