Micromod Micro-DCI: 53SL6000 Single Loop Controller - Manual (Page 135)

\S.tc: Thermocouple type CH_S.
Std: Standard setpoint mode.
StEP: Programmer step.
StoP: Stop.
StP.E: Enable oPEr prog step access.
StV: Setpoint track value.
SWA: Auto push button.
SWr: Remote push button.
SuMM: Summation function.
SYS: System module.
tAG: Unit tagname.
td: Derivative time.
tLiM: Easy-Tune settling time limiting.
tP: Easy-Tune first order time constant.
tr: Reset time.
t.tc: Thermocouple type t.
u.tc: Thermocouple type u.
Vdn: Control valve down signal.
Vup: Control valve up signal.
Wp: Easy-Tune calculated dead-time.
Xor: A XOR B logic function.
/Xor: NOT (A XOR B) logic function.
YES: Yes.
Zero: Zero.
53SL6000 Instruction Manual Appendix D. Prompt List
D-4