MPM MKO-01 - Manual (Page 21)

21
GB
PRIOR TO THE FIRST USE:
1. Prior to the first use of the appliance wipe the appliance with wet cloth and with dry one
thereafter.
2. The accessories supplied with halogen oven encompass the following scope, signifi-
cantly facilitating the preparation of meals:: low cooking rack, high cooking rack, ring
increasing the capacity, dishes, pins, sieve, holder, base for the lid of halogen oven.
3. After removing the lid, place the cooking rack into the dish. The rack will be used for
the meal to be cooked. The use of low cooking rack is recommended for majority of pro-
ducts, particularly large sized ones e.g. whole chicken or the meals prepared in higher
dishes e.g. au gratin or cake. High cooking rack is used for products to be cooked in low
dishes with solid bottom e.g. small forms for cakes and for roasting of shish kebab etc.
4. The distance of at least 2 cm should be provided between the product and fan grille.
NOTE! The table specifying times and temperatures of roasting, included in the pre-
sent manual contains approximated values – actual values may differ from
those included in the table – in accordance with the weight of products, their
freshness and degree of freezing.
USE OF HALOGEN OVEN
1. Place the product onto the cooking rack. The product is laid directly onto the cooking
rack (chicken, fish, toasts etc.) or onto aluminium foil coated with oil. Prior to laying
the product directly onto the cooking rack, the latter should be coated with oil.
2. Close the lid of halogen oven and make sure that is is fitted securely.
3. Insert the plug into the socket.
4. Depress the holder of the oven incorporated on the lid. Then rotate the timer knob cloc-
kwise – orange caution light will go on.
5. Set required temperature by means of the temperature knob – green caution light
will go on.
When the value of temperature setting is achieved, temperature indicator will go off.
6. The operation of the appliance will be completed automatically after the lapse of ro-
asting time which has been set previously.
7. After lifting of the holder, the electric energy supply will be discontinued and the pre-
vious position of safety switch will be returned automatically.