ATON AH66T - Manual (Page 10)

A T O N AH66T INSTALLATION MANUAL
© ATON 2010 | All rights reserved. Page 9
33
AH66T Rear Panel Connections
Figure 1-2 AH66T Rear Panel Connections
Item Function Item Function
1 AC Power Connector and Fuse Holder
4A 250VAC 5x20mm SLO-BLO
12 Source Specific IR Outputs
Routes IR to specific sources
2 B1 Button
Activates a test sequence to verify operation
13 ALL IR Output
Use when IR routing is not needed
3 USB Download Port
Used to download configuration programming and
firmware
14 Sense Input Triggers
Used for conditional programming
4 Unit ID Switch
Sets chassis as unit ID # 1 or unit ID # 2
15 Speaker Outputs
30W per channel, Stereo or Mono capability
5 Relay Connection
Used to activate relay controlled devices
16 Zone Preamp Outputs
Fixed or Variable Output Level
6 System Trigger Output
Provides a 12V Trigger Output whenever any zone is on
17 Source Audio Inputs
7 Serial Ports (2)
Connections for serial control Output or Input
18 Page / Doorbell Audio In
(Future Use)
8 IR Loop Connections
Links second chassis IR inputs to main chassis
19 Music On Hold Output
Connects to phone systems with Music On Hold Inputs
The Internal Tuner is used for MOH Audio
9 A-Net Connections
Links A-Net between chassis
20 Tuner Output
Share tuner output with second chassis
10 Zone Touchpad Connections
Connect to OLED2s
21 FM Antenna Connection
11 Zone IR Connections
IR input from 3rd party controllers
22 AM Antenna Connection
2 9 3 4 5 6 7 8 1 10 14 13 12 11
15 19 18 17 22 21 20 16