ATON AH66T - Manual (Page 23)

A T O N AH66T INSTALLATION MANUAL
© ATON 2010 | All rights reserved. Page 22
IR ALL Port Connections
Two IR ALL OUT ports are provided for controlling additional components such as
Televisions or A/V Receivers that may require control regardless of the source currently
selected. The IR ALL OUT ports are also useful when controlling several non-identical
sources.
For really large installations or when a zone output of the AH66T is used as an input for a
local receiver, an IR ALL OUT port can be routed to an IR Distribution Block (such as
ATON’s AIB4) and sent to several components.
Figure 3-5: IR ALL Ports
The ALL IR Out ports are only active when one or more of the six Source IR Outputs are
active.
IR routing options are included in the ATON configuration software for IR routing when
the system is off and when an internal tuner is selected.