ATON AH66T - Manual (Page 80)

A T O N AH66T INSTALLATION MANUAL
© ATON 2010 | All rights reserved. Page 79
Preset Function Command
Description: Controls for preset stations. Status can be queried.
Examples:
&AH66,R1,PRESET,UP<cr> Changes CHASSIS ONE’S (R1) tuner to the next
higher (UP) PRESET (PRESET).
&AH66,R2,PRESET,DOWN<cr> Changes CHASSIS TWO’S (R2) tuner to the next
lower (DOWN) PRESET (PRESET).
&AH66,R1,PRESET,47<cr> Changes CHASSIS ONE’S (R1) tuner to PRESET
(PRESET) number 47 (47).
&AH66,R1,PRESET,SAVE<cr> SAVES (SAVE) CHASSIS ONE’S (R1) currently
selected station as a PRESET (PRESET). (Saves to
the first available preset slot.)*
&AH66,R1,PRESET,SAVE,1-99<cr> SAVES (SAVE) CHASSIS ONE’S (R1) currently
selected station as PRESET (PRESET) 1-99 (1-99).
&AH66,R2,PRESET,DELETE<cr> DELETES (DELETE) CHASSIS TWO’S (R2) currently
selected PRESET (PRESET).*
&AH66,R1,PRESET,?<cr> QUERIES (?) CHASSIS ONE’S (R2) currently
selected PRESET (PRESET).
Example responses are: *AH66,R1,PRESET,1, *AH66,R1,PRESET,27,
*AH66,R1,PRESET,80, etc., where the number is the preset.
0=station is not a preset.
* - When these commands are entered as shown, they will execute in ten seconds. To
force the commands to execute immediately, add “,ENTER” (omit quotation marks)
prior to the Carriage Return <cr>.
Prefix TS Parameter 1
Group
Parameter 2 Parameter 3
(Optional)
&AH66 R1/R2 PRESET UP/DOWN/1-99/SAVE/DELETE/? ENTER