Relay output connection – ATON AH66T User Manual
Page 30
Advertising
A T O N
AH66T
INSTALLATION MANUAL
©
ATON 2010 | All rights reserved.
Page 29
Relay Output Connection
Each AH66T provides one relay that can be programmed using the ATON configuration
software to provide automated events such as lift operation, screen operation, and drapery
control. Connections include COMMON, NORMALLY CLOSED and NORMALLY OPEN.
Figure 3-15: Relay Connection
If a voltage trigger is required, an external power supply can be connected to the AH66T’s
relay.
The relay is rated for a maximum of 24 Volts, AC or DC and a maximum of one amp of
current. Do not connect to 120 VAC or 240 VAC house line wiring!
Figure 3-16: Relay Connection with Power Supply
Advertising