Electronics International MVP-50T - Manual (Page 70)

Testing .wav files on the MVP: Testing .wav files on the MVP: Testing .wav files on the MVP: Testing .wav files on the MVP: Testing .wav files on the MVP:
1. From the Main Engine Screen navigate to the “Voice & Display Controls” screen (i.e.: press the “Menu”
button > Select the “ Voice & Display Controls” at the bottom of the blue screen).
2. Under the heading “Test a voice file” select the name of your .wav file and then select Play —> YES. If the
sound is garbled, the audio format may not be correct.
Assigning a .wav file to a Function as an Audio Warning: Assigning a .wav file to a Function as an Audio Warning: Assigning a .wav file to a Function as an Audio Warning: Assigning a .wav file to a Function as an Audio Warning: Assigning a .wav file to a Function as an Audio Warning:
Note: You must have the Password to download audio files to the MVP. Non-certified MVP’s are shipped
with a Password of “0100.”
1. From the Main Engine Screen, navigate to the “4. Redlines, Limits and Color Setup” screen (i.e.: press the
“Menu” button > Select the “System Configuration Screens Menu” at the bottom of the blue screen > Select
the “4. Redlines, Limits and Color Setup” screen near the bottom of the black screen).
2. Select the “Function” to which you wish to assign the audio warning .wav file. Note: The Operating In-
structions have further information on the operation of this screen.
3. Select the warning activation type and voice warning file name at the bottom of this screen.
Page 2 of 2