King Kooker Cast Cookers with Timers - Manual (Page 11)

tools reQuIred:
torQue WrencH or AdjustAble WrencH, leAK testInG solutIon
1. Before assembling, check that all cooker components are included in the shipping carton. Identify
these cooker parts from the assembly drawing. Accessories such as pots may vary according
to model. Check the list of accessories on your cooker box. The following parts are considered
essential and should be included in your package regardless of model number.
required Parts list:
cooker stand, cast burner, lP Hose and regulator with timer, thermometer
If any of the above parts are missing, contact Metal Fusion, Inc. at 1-800-783-3885 between the
hours of 7:30 a.m. and 3:30 p.m. CST Monday through Friday for replacements.
2. Read assembly instructions, and understand sequence of assembly, before commencing to
assemble your cooker.
3. If your casting(s) is not pre-installed follow the below cAstInG InstAllAtIon directions.
11
sectIon I
outdoor cooKer Assembly
tHe use And cAre mAnuAl must be reAd And understood
beFore usInG tHe APPlIAnce
(Throughout this manual the words appliance, cooker, fryer/boiler, burner and stove will be
used interchangeably to refer to the King Kooker ® Outdoor Cooker.)