AMT Datasouth Codewriter 4500 Series - Manual (Page 23)

Quick Start Guide
13
8. Press the
ONLINE
PAUSE key. If any parameters were changed, the display will read
ENTER to save new defaults. Press the
ENTER
PRINT key to save these values.
The display will then read Interface Status Online. [The remaining
parameters under the Label Parameters menu will not require adjustment
at the this time.]
NOTE: In step 8, pressing the
CANCEL
key after pressing the
ONLINE
PAUSE key
will avoid saving the settings. The display will read ENTER to exit
without saving. Press the
ENTER
PRINT
key to go back online without
saving the changes.