AMT Datasouth Codewriter 4500 Series - Manual (Page 55)

Operator Panel Reference
45
Default Parameter Values
This section lists the default parameter values. The Operator may restore these values
using the ENTER to recall defaults feature in the System Parameters menu.
Print Parameters
ƒ Print Speed: 4505/4505+ – 100%, 4510 – 60%
ƒ Print Darkness: 4505/4505+ – 80%, 4510 – 90%
ƒ Gap Sense: 50%
ƒ Bar Sense: 50%
ƒ Ribbon Sense: 50%
ƒ Presentation Distance: 0.45 inches
ƒ Feed Forward Distance: 0.00 inches
ƒ Print Test Label: 1
ƒ SCM Protected: Yes
Label Parameters
ƒ Media Type: Thermal Transfer
ƒ Label Width: 4.0 inches
ƒ Label Length: 4.0 inches
ƒ Label Gap: 0.11 inches
ƒ X Offset: 0.00 inches
ƒ Y Offset: 0.00 inches
I/O Configuration
ƒ Baud Rate: 9600
ƒ Flow Control: Hardware
ƒ RTS Polarity: Online = High
ƒ DTR Polarity: Ready = High
ƒ Parity: None
ƒ Data Bits: 8
ƒ Stop Bits: 1
System Parameters
ƒ Units: Inches
ƒ Media Alignment: Automatic
ƒ Hex Dump Mode: OFF