SKC Limited Haz-Dust IV - Manual (Page 39)

Reviewing Stored Data
Introduction The Haz-Dust IV provides extensive capabilities for reviewing internally
stored data and statistics on the LCD.
LCD display The following information is displayed on the LCD.
Display Description
Date Date of sampling.
Start Time sampling began.
Stop Time sampling was terminated.
Time Time of occurrence of reported statistic.
MAXIMUM Sample Highest concentration of dust particles.
MINIMUM Sample
Lowest concentration of dust particles.
T.W.A. Time weighted average concentration of dust
particles.
Elapsed Elapsed time of the time weighted average.
S.T.E.L. Short-term exposure limit.
Viewing data
on the LCD Follow the steps in the table below to review stored information and statistics.
Review the flow chart on page 3-16.
Step Action
1 Select Review Data.
2 Select Statistics.
3 Determine your next step using the table below.
If... Then the...
Memory holds data points in
other locations.
Review Location Screen
appears.
Memory has been cleared of
all data points.
The Scanning Memory
Screen displays. Go to step 7.
4 Select the Location using the table below.
To review... Select...
The Location displayed in the
Review Loc field.
Review Loc XXX and go to
step 7.
A different Location New Location and continue
to step 5.
Continued on next page
3 - 15