SKC Limited Haz-Dust IV - Manual (Page 49)

Downloading Data,
Continued
Preparing the
unit. Follow the steps in the table below to prepare the EDC unit for data
transmission.
Step Action
1 Select Playback or Review Data (depending on your instrument)
from the Main Menu on the unit.
2 Select Download.
3 Select To Dust Data Collector.
4 Press ENTER.
Result: The Transmitting window appears.
Note: Bars on the PC screen should increase as the unit
downloads.
5 When the transmission is complete...
• The To Dust Data Collector selection screen is displayed on
the units monitor. The unit may be shut off at this time.
• The downloaded data is displayed in the Project Folder on the
PC. (Figure 8).
Figure 8. Project File after data has been transmitted.
4- 9