Loading the dustcomm software – SKC Limited Haz-Dust IV User Manual
Page 44
Advertising
Loading the DustComm Software
Windows ME
Follow the steps in the table below to load the DustComm software if using
Windows ME.
Step Action
1
Select the Start Menu.
2 Select
Programs.
3
Select the folder EDC DustComm Pro 1.2
4
Select DustComm Pro 1.2
Windows NT,
2000 & XP
Follow the steps in the table below to load the DustComm Software if using
Windows NT, 2000 & XP.
Step Action
1
Double Click on the icon on your desktop.
NOTE: If shortcut icon does not appear on desktop follow the
steps for Windows ME.
Figure 2. DustComm Screen immediately after loading software.
4- 4
Advertising