Sonnet Technologies Crescendo_L2 Processor Upgrade - Manual (Page 18)

12
Chapter 2
5. Remove the back panel from the computer by unlatching it from
the case (Figure 3).
6. Prior to removing the logic board from the computer, touch the
metal vertical plate (Figure 4) to which the logic board is attached
to discharge any potential damaging static electricity.
7. Swing the wire handle out from its original position (Figure 4) to
remove the logic board from the computer.
Figure 3: Unlatch and remove back panel
Figure 4: Swing wire handle away from case to remove logic board
vertical plate of
logic board