Sonnet Technologies Crescendo_L2 Processor Upgrade User Manual
Page 28
Advertising
22
Chapter 3
6. Swing the wire handle out and away from its original position and
slide the logic board out of the computer (Figure 3). Set the logic
board aside.
7. Unpack everything you will need from the packaging box that
contains the Crescendo/L2 card. Close the box. The box will be
used as a relatively soft installation surface to protect the
components underneath the logic board.
8. Place the logic board on the box (Figure 4).
Figure 3: Slide logic board out of computer
Figure 4: Place logic board on packaging box
Advertising