Sonnet Technologies Crescendo_L2 Processor Upgrade - Manual (Page 36)

30
Chapter 4
5. Note the small metal tab protruding on the underside of the
logic board (Figure 3). Take care not to deform it during the
installation process.
6. Unpack everything you will need from the packaging box that
contains the Crescendo/L2 card. Close the box. The box will be
used as a relatively soft installation surface to protect the
components underneath the logic board.
7. Place the logic board on the box (Figure 4).
Figure 4: Place logic board on packaging box
Figure 3: Take care not to bend the metal tab on underside of the logic board