Shut down and open computer – Sonnet Technologies Crescendo_L2 Processor Upgrade User Manual
Page 63
Advertising
57
Shut Down and Open Computer
1. Shut down your StarMax. If the computer has been on for any
length of time, wait a few minutes for it to cool before beginning
the installation.
2. Disconnect the power and peripheral cables from the back of the
computer and move it to an area where you can freely work.
3. Open your StarMax computer by first loosening the four security
screws (Figure 1) on the back of the case with a medium
flatblade screwdriver.
4. Gently lift the case cover away from the computer (Figure 2).
StarMax 4000, 5000, and 5500 Installation
Figure 1: Remove the four security screws
Figure 2: Remove case cover from computer
security screw
security screw
security screw
security screw
Advertising