Sonnet Technologies Crescendo_L2 Processor Upgrade - Manual (Page 31)

25
Power Macintosh 6360 Installation
Reinstall Logic Board Into Computer
1. Slide the logic board into the computer (Figure 9). Make certain
the logic board slides into the inner guides (Figure 9, inset) of the
computer’s case.
2. Raise and secure the wire handle. Replace and tighten the two
security screws and replace the back panel (Figure 10).
3. Return your Power Macintosh to your computing area and
reconnect the power and peripheral cables to the computer.
4. Affix the Powered by Sonnet label to the front of your computer.
Figure 9: Slide logic board into computer
Figure 10: Raise wire handle and replace security screws and back panel
guide
security screw security screw