Sonnet Technologies Crescendo_L2 Processor Upgrade - Manual (Page 27)

21
Power Macintosh 6360 Installation
3. Open your Power Macintosh by first unlatching the back panel
from the rear of the computer (Figure 1).
4. Prior to removing the logic board from the computer, touch the
metal vertical plate (Figure 2) to which the logic board is attached
to discharge any potential damaging static electricity.
5. Remove the two security screws with a medium head Phillips
screwdriver (Figure 2).
Figure 1: Unlatch and remove back panel
Figure 2: Remove the two security screws
vertical plate of
logic board
security screw security screw