Sonnet Technologies Crescendo_L2 Processor Upgrade - Manual (Page 48)

42
Chapter 6
PowerBase Crescendo/L2 Installation
Install Software
1. If you are upgrading to Mac OS 9 as part of this installation,
do so now. Sonnet recommends a clean/universal install of the
Mac OS. Start up your computer from the Mac OS CD and double
click the Mac OS Install application. In the Select Destination
window, click the Options button and click the Perform Clean
Installation checkbox that appears in the subsequent screen.
Click the Select button. Proceed through the next several screens
until you reach the Install Software window. Click the Customize
button. In the Custom Installation and Removal window click
the pop-up menu to the right of Mac OS 9. Change the
“Recommended Installation” to “Customized installation.” The
Select Mac OS 9 Features to Install window will appear shortly.
Change “Recommended Installation” to “Universal Installation”
from the pop-up menu. Click OK, Start, then Continue to
complete the installation. After the software is installed, quit the
Mac OS Install application and restart your computer.
2. Insert the Crescendo/Encore Install diskette into the floppy disk
drive. Double click the Crescendo/Encore Install icon. By default,
with “Easy Install” selected from the pop-up menu, the required
software will be installed into the active System Folder on the boot
drive. If this is ok, click the Install button; otherwise, select
“Custom Install” from the pop-up menu for more options or select
another drive to install the software. The installer will install the
appropriate software into the System Folder of your computer. If the
installation was successful, a dialog box will appear. Click Quit to
leave the installer and shut down your computer.
Support Note: We recommend that you make a backup of important
information on your hard drive prior to installing new hardware or
software. When handling computer products, you must take care to prevent
components from being damaged by static electricity. Avoid carpeted areas,
handle processor upgrade cards only by their edges, and avoid touching
connector traces and component pins.
The PowerBase features a low profile desktop or mini tower case design. For the
purpose of these instructions, a universal installation procedure of the
Crescendo processor upgrade card is outlined that applies to all PCI-based
Power Computing computers. For hardware details on your particular computer
model, please refer to your Power Computing user's guide.