Sonnet Technologies Crescendo_L2 Processor Upgrade - Manual (Page 50)

44
Chapter 6
Remove Level 2 Cache Card
1. Identify the internal components of your PowerBase. Touch the
metal shielding of the internal assembly (that houses the floppy
and hard disk drives) to discharge any potential damaging
static electricity.
2. If installed, remove the Level 2 cache card from the L2 Cache Slot
(Figure 3-Label A).
Reset CUDA Switch
Reset the CUDA switch on the logic board. It is is
located directly next to the floppy disk drive connector,
next to the L2 Cache Card Slot (Figure 3-Label B).
Resetting this switch ensures that a processor upgrade
card installed into your computer is recognized at the
next startup.
Internal IDE Riser Card
Pr
ocessor Card Slot
L2 Cache Slot
DIMMs
Batter
y
CUDA
Switch
Internal SCSI
Floppy
Power
Figure 3: Diagram of PowerBase logic board
A
B