Sonnet Technologies Crescendo_NuBus Processor Upgrade Card - Manual (Page 28)

22
Install Crescendo NuBus Processor Upgrade Card
Remove the Crescendo card from the anti-static package, making sure to
handle the card by the edges (Figure 5). Your card may differ from what is
pictured below.
• If You Are Re-Installing an AV or HPV Card – Temporarily set the
Crescendo card aside and continue with the instructions on the
following page to install the Crescendo with an AV or HPV card.
• If You Do Not Have an AV or HPV Card – Align the Crescendo card
over the PDS slot (Figure 6). Gently press down until the card is firmly
seated in the PDS slot. Replace the cover onto your computer and
finish the installation in the section entitled, “Reconnect Power and
Peripheral Cables” on page 36.
Chapter 3
Figure 6: Touch power supply metal shielding to discharge static electricity
Crescendo card
PDS slot
Figure 5: Remove Crescendo card from packaging
NuBus slots