Sonnet Technologies Crescendo_NuBus Processor Upgrade Card - Manual (Page 32)

26
Chapter 3
2. Orient the video adapter board in front of you as shown in Figure 12.
Using a small Phillips screwdriver, remove the upper left stand-off
from the adapter board (Figure 12).
3. Align the HPV card directly over the video adapter board with the
connector of the HPV card facing upwards (Figure 13). The holes
on the HPV card should align directly with the upper right and lower
left standoffs on the adapter board.
Figure 12: Remove upper left standoff from video adapter board
Figure 13: Orient HPV card over video adapter board
HPV card connector facing upwards
standoff