Sonnet Technologies Crescendo_NuBus Processor Upgrade Card - Manual (Page 39)

33
Power Macintosh 7100 Installation
Attach Video Flex Cable
1. Attach the connector on the video flex cable to the AV or HPV card
(Figure 24). Gently press down on the outer edges of the connector
to avoid pricking your fingers on the series of pins on top of the
connector. If necessary, use a piece of foam from the packaging
material your card shipped in to provide a cushion between your
finger and the pins.
2. Return the computer to your computing area.
3. IMPORTANT! – Before replacing the cover onto your computer,
attach your monitor’s video cable to the AV or HPV card 15-pin
monitor connector (Figure 25). Secure the cable by tightening the
thumbscrews on the cable’s connector. Connecting the cable anchors
the card in place while replacing the cover.
attach connector
Figure 24: Attach video flex cable to AV or HPV card
Figure 25: Reattach 15-pin monitor connector
15-pin monitor connector