Sonnet Technologies Crescendo_NuBus Processor Upgrade Card - Manual (Page 37)

31
Power Macintosh 7100 Installation
Remove Access Port Cover From Middle NuBus Port
1. Remove the access port cover (if installed) from the middle NuBus
port located at the back of the computer (Figure 21). Use your finger
or a small flatblade screwdriver to push it out from the port as shown
in Figure 21.
2. Insert the access port cover into the PDS port (Figure 22).
Figure 21: Push out middle NuBus access port cover
Figure 22: Insert access port cover into PDS port