Sonnet Technologies Crescendo_NuBus Processor Upgrade Card - Manual (Page 77)

71
3. Carefully install the Crescendo by first aligning the card over the
PDS slot, lining the notch in the card with the corresponding
notch in the PDS slot (Figure 5).
4. Once the card is correctly aligned over the PDS slot, rotate the
Crescendo card perpendicular to the logic board and slowly press
the card into the PDS slot until the card is firmly seated (Figure 6).
Radius System 100 and 81/100 Installation
Figure 5: Align notch in Crescendo card with notch in PDS slot
Figure 6: Install Crescendo card into PDS slot
notch in PDS slot
Crescendo card
PDS slot