Replace case cover onto computer – Sonnet Technologies Crescendo_NuBus Processor Upgrade Card User Manual

Page 58

Advertising
background image

52

Chapter 4

3. IMPORTANT! – Before replacing the cover onto your computer,

attach your monitor’s video cable to the AV or HPV card 15-pin
monitor connector (Figure 24). Secure the cable by tightening the
thumbscrews on the cable’s connector. Connecting the cable anchors
the card in place while replacing the cover.

Replace Case Cover Onto Computer

1. Carefully replace the cover onto your computer by slanting the front

end of the cover over the computer, making sure the tabs on the back
of the cover slide inside the rear of the case (Figure 25).

15-pin monitor connector

Figure 25: Replace cover onto computer

Figure 24: Reattach 15-pin monitor connector

Advertising