IAI America RCA2-TW4N User Manual
Page 110
Advertising
102
13. Maintenance and Inspection
13.6.3 How to apply grease
Pull the table all the way out before removing the ball screw cover.
(1) For the guide section, apply the grease by moving the table back and forth and spreading it out,
either by pushing a scraper between the table and base or by lubricating with a grease injector.
Grease the guides on both sides.
When complete, wipe away any excess grease.
Pinch in the direction of the
arrows to remove ball screw
cover
Ball screw cover
Advertising