IAI America RCA2-TW4N - Manual (Page 18)

10
6.2 Handling the Actuator Assembly
Secure the sliders to prevent sudden movement during transport.
If any end of the actuator is overhanging, secure it properly to avoid significant movement due to
external vibration.
When transporting the assembly without the ends of the actuators fastened, do not subject the assembly
to an impact of 0.3 G or more.
When suspending the mechanical equipment (system) with ropes, avoid applying force to actuator,
connector box, etc. Also, avoid the cables being pinched or caused an excessive deformation.
When carrying the actuator, exercise caution not to bump it against nearby objects or structures.