IntelliTrack WMS – Warehouse Management System User Manual
Page 113
Chapter 6
Receiving
103
The default “source” site is entered in the Site field. If you want to
change the “source” site, enter the desired site in the Site field.
The “source” location defaults to the location setting entered in the
Receiving location field in the Option form/Receiving tab for the
WMS RF Server. If you want to enter another “source” location, enter
it in the Location field.
5.
Press the <Enter> key to continue. A screen appears that shows the
items in this location.
Select the <F1> and <F2> keys to scroll through the list of items in the
location.
6.
When you reach the item that you want to move, select the <Enter>
key.
7.
The “destination” location screen appears.
The location is chosen automatically by the system.
Select the <F3> (Itm) key to list all locations where the item is cur-
rently stored.
If the cubing option is on, select the <F4> key (Fit) to list up to five
locations that have sufficient space to store the item's quantity.
Select F5 (Empty) to list up to five (5) empty locations.
8.
Press the <Enter> key to continue with the put-away process.
9.
If put away item labels are enabled in the WMS RF Server Options
form\Printing tab, the Put Away Label screen appears. Enter the
amount of labels for this put away item that you want to print. The
labels will be sent to the printer that is set in the RF Client options upon
put away item confirmation (for more information about setting the
default printer, see