IntelliTrack WMS – Warehouse Management System User Manual
Page 97
Chapter 5
Inventory Management
87
2.
From the Inventory menu, press <F5> to perform item replenishment.
Note: The first item to be replenished is displayed with the associated
quantities. The required quantity is the threshold quantity, which is the
quantity that triggers the warning that the location has fallen below an
acceptable level. The “Qty” represents the actual quantity currently in the
primary location. The “Replenish quantity” is the amount of inventory the
operator is required to move into the location to satisfy the replenishment
process.
3.
Press the <Enter> key. The following screen appears. The “source”
Location for Replenishment is selected.
The <F2> key scrolls forward through the source location options.
The <F1> key scrolls back through the source location options.
When you are ready to continue, press the <Enter> key.
4.
The following screen appears. It contains the inventory information for
this item-location. When you are ready to continue, press <Enter>.
5.
The following screen appears. It is a confirmation screen, which asks
you to confirm the replenishment for this item and location.