IntelliTrack WMS – Warehouse Management System - Manual (Page 98)

I NTELLI T RACK WMS RF V 8.1
RF Guide
88
6. Confirm the replenishment request by entering the Item number in the
Item # field and the Location in the Location field. Then press
<Enter> to continue.
7. If the item number and location match the item number and location
entered for this replenishment, the following screen appears. (Other-
wise, and a screen with an error message appears, telling you that either
the item or location did not match. You are returned to the Confirma-
tion screen and asked to confirm the replenishment order again.) It
shows the “destination” location and contains a pallet ID field. Enter a
Pallet ID in the Pallet field ONLY if it is the replenishment destination.
Press <Enter> to continue.
The following screen appears. It asks you if you want to convert the
item to the lowest unit of measure. If you want to convert the item unit
of measure to the lowest UOM for the item, press <F1> key for Yes. If
you do not want to convert the item unit of measure, press the <F2>
key for No.
The <F2> key scrolls forward through the UOM options.
The <F1> key scrolls back through the UOM options.