Replenishment – IntelliTrack WMS – Warehouse Management System User Manual
Page 96
I
NTELLI
T
RACK
WMS RF
V
8.1
RF Guide
86
14.
Enter the item quantity for the pallet in the Qty field. Press the
<Enter> key to complete process.
15.
Repeat steps 12–14 until all items are added to the pallet.
16.
Press the <ESC> key to exit to the Inventory menu. Press the <ESC>
key again to return to the Main menu.
Replenishment
WMS RF Professional supports replenishment. The Replenish function
moves material from a storage location to a primary location. The primary
location, the threshold quantity, and the replenishment quantity can be
set from the Primary Locations tab on the Item Data form in the WMS
workstation application.
When the operator selects the Replenish function, any primary locations
needing replenishment are displayed. The operator is then directed to a
bulk location containing the item. Bulk locations presented to the operator,
are sorted by the put-away sequence.
1.
From the Main menu, press the <F1> key to open the Inventory menu.