IntelliTrack WMS – Warehouse Management System - Manual (Page 71)

Chapter 3
RF Client
61
RF Windows Client
A RF Windows Client simulates an RF portable device on your PC. To
open the RF Windows Client, select Start > Programs > IntelliTrack >
RF Server > Large Client; or Small Client.
Note: In order to open the RF Windows Client, you must disable the Line-
Mode Telnet Support option in the RF Server Options form\Utilities tab.
For more information about this setting, please see
“Setting Utility Options”
on page 11 .
• Small Client: The small client represents hand held units (20 charac-
ters per line).
• Large Client: The large client represents the large vehicle mounted
units (80 characters per line).