IntelliTrack WMS – Warehouse Management System - Manual (Page 138)

I NTELLI T RACK WMS RF V 8.1
RF Guide
128
4. The Picking menu appears again. Notice that the <F4> selection is now
Stage Wave, and the <F5> selection contains a wave number in
parentheses. For our example, this means that we have selected wave
103 for staging.
5. Press the <F4> key to stage the wave. The following screen appears.
Each screen lists the item number and the total item quantity for all
items in the orders included in the wave.
The <F2> key advances you through the item list.
The <F1> key returns to the previous item listed.
6. If you want to stage an item from the wave, press the <Enter> at that
item screen to process it for staging. The Location screen appears. It
contains the item location. (If you are picking by zone, the locations are
restricted to the zone locations.)
The <F1> key advances to the next item location.
The <F2> key returns to the previous listed location.
Enter another location or select the default location. When you are
ready to continue, press the <Enter> key.
7. The following screen appears. It displays the item’s unit of measure
(UOM) in the UOM field and the UOM item quantity in the Qty field
for the location selected.