IntelliTrack WMS – Warehouse Management System - Manual (Page 133)

Chapter 7
Picking
123
The <F2> key advances to the next item location.
The <F1> key returns to the previous listed location.
7. Select another location or select the default location. When you are
ready to continue, press <Enter>.
8. The following screen appears. It displays the item’s unit of measure
(UOM) in the UOM field and the UOM item quantity in the Qty field
for the location selected.
The <F2> key advances to the next UOM of the item in the location.
The <F1> key returns to the previous listed UOM for the item.
The <F3> key opens up a Letdown screen. If the item being staged
exceeds the pick order quantity because the item UOM at this location
is too high, you are able to perform an inventory let down for this item
by using the <F3> Letdown option; please see the next step for item let
down instructions.
If you are able to fulfill the order quantity, select the UOM and quantity
and then select the Enter key to continue with the pick. (Skip the next
step, since you do not have to perform an inventory let down to meet
the pick ordered quantity.)
If the item being picked exceeds the pick ordered quantity because the
item UOM at this location is too high, you are able to perform an item
let down; please refer to the next step.
9. If the item being staged requires a let down to meet the pick UOM
quantity at the selected location, place the UOM quantity for the let
down in the Qty field at the order quantity screen.