IntelliTrack WMS – Warehouse Management System - Manual (Page 40)

I NTELLI T RACK WMS RF V 8.1
RF Guide
30
sent to the device. (If Wavelink is not installed on the device, click the
Application & Config button to send both the Wavelink application
and the RF Telnet configuration files to the device.)
2. If your device is not connected to the PC, a dialog appears indicating
that you must connect the device to the PC.
Connecting to the RF Server
1. Turn on the Falcon 4420 device or the Symbol MC 9000 device. You
will see a Wavelink icon on the device desktop.
2. Make sure the device is connected to the PC that contains the Wavelink
configuration settings for RF Telnet. Double-click the Wavelink icon
to launch the application and connect to RF Server.
3. A blank screen appears. Enter STARTRFS and then tap Enter to con-
nect to the RF Server.
4. Once the RF Server connection is established, enter your IntelliTrack
RF Login.
If you have trouble establishing a host connection on the handheld device,
please refer to the following sections:
“Checking your Device-PC Connec-
tion” on page 29 and “Verifying Settings on the TelnetCE Client” on page 31 .
Wavelink Telnet Troubleshooting
If you are unable to connect to the RF Server on your handheld device, ver-
ify your device–PC connection and your TelnetCE settings. Also, if your
system uses a firewall, make sure you set the necessary exceptions. Please
refer to the sections that follow for more information.
Checking
your Device-
PC
Connection To ensure the Falcon 4420 device or the Symbol MC 9000 device is con-
nected to the PC:
1. From the Wavelink Product Configuration Screen, click the Config
Only button.
2. A dialog appears indicating whether your device is connected to the
desktop computer (or PC).